Liczymy pasujące modele…
A cable grommet that can be used to cover holes drilled with a hole saw to pass cables through it. As it is parametric, even if your desired size is not available, you can just change the parameters to fit your hole diameter and depth…
FAST PRINT - Single Wall Basket Weave - NO SUPPORTS The Problem: All baskets and lids with grid-like perforations result in long print times If you've printed such a basket you'll notice that the printer spends the majority of its time…
The Sunlu S1 and eSun eBox unfortunately don't come with a built-in humidity gauge. But there are cheap mini digital hygrometer/thermometers available in many shops which allows you to easily add one yourself. My design consists of a base…
Print your own 3D printer filament Dry Box! Check out this video I made about it, including assembly instructions: Parts are optimized to work best with PLA filament. Easy printing, no support material needed. Snap-fit rollers, hygrometer…
This is a stand for the round common Hygrometers. I designed it specifically to fit into the middle of the Bambulab AMS (tested with new version, bought in 2023). Of course it can also stand alone anywhere else. Secure fit, Hygrometer…
I had changed all my box to v3, please use my AMS dry box center v3.3mf for print. If the hygrometer(some is so big) is a little small, please use same paper to fit it(I used it in photos). For drying Bambu AMS box, you can directly add…
A filament dry box that mounts to the side of the Elegoo Centauri carbon based on the design of @NaNO3 which was originally based on @Yanev 's parametric toolbox. I have included versions for the lid that work with or without the addition…
A little stand for the standard LCD Hygrometer or Thermometer you can find in many onlineshops. Easy to print with the face on the printbed. Click here for a smaller version of this stand! If you like check out my other designs too!
Hallo zusammen, hier mal wieder einige Optimierungen für meine 3D-Druckwerkstatt, die ich euch gerne zum Nachdruck übergeben möchte. Um die Druckqualität zu erhöhen, habe ich mir dann doch mal einen Drybox gebaut und verschiedene Entwürfe…
The design consists of three parts : BASE – outer diameter of 60 mm , mounted in the table and holds the insert securely INSERT – snaps into the base and can rotate 360° , allowing flexible cable positioning BRISTLES – clips into the…
Hygrometer holder suitable for the ACE Pro from Anycubic. The holder fits the super cheap, round hygrometers that you can find everywhere on Amazon, Ebay or AliExpress. The hygrometer can be read through the lid of the ACE Pro and does…
I've been using the great silica boxes designed by SoftFever (https://www.printables.com/model/269545-slica-boxdry-box-for-bambulab-ams) inside the left/right slots of the Bambu Labs AMS and the thermometer/hygrometer stand by maddtt…
Small stand for Bambu Lab AMS unit to hold a hygrometer. The Hygrometer was purchased off Amazon and was a "JEDEW mini hygrometer"
Update June 12, 2023 A loading funnel is now available as well, download it here ! Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs…
A combined desiccant and hygrometer holder that slips into the pour hole of the lid of a plastic dry goods box. I like this approach as it is neater than using baggies. With this setup, I can get internal humidity down to 10-15%.…
Set of threaded grommets for hanging the curtain. With these grommets I was able to make wardrobe curtains that cover coats and shirts. You don't need any other tools except small scissors (and of course a 3d printer). Variants: The…
In my experience cable grommets are expensive, hard to find, and never quite the right size, shape, or color for my needs. That means they're a nearly perfect use-case for 3D printing, because you can print the exact number, size, and…
A minimalistic stand for the standard LCD Hygrometer or Thermometer you can find in many onlineshops. The bottom is labeled, pay attention to this when inserting the hygrometer. A larger version of this stand:…
I was tired of cable grommets for desks that always came loose. This is a locking grommet. Use a 1 ¾" hole saw to create the hole. This will work for desktops up to 0.75" thick. This is my first ever model posting of a 3D model, so if you…
Wallace and Gromit are from the British clay animation comedy series created by Nick Park of Aardman Animations. Wallace is a good-natured, eccentric, cheese-loving inventor and his companion Gromit is a silent yet loyal and intelligent…
Thanks Extrutim for the original design! I searched a nice place for the original stand and saw my skadis board... So I added two hooks and ventilation holes. As simple as that.
A 3D Printed Grommet that works.
This model inherits the characteristics of PsychProd's original model: Fast print speed due to the clever basket design, great air permeability, and the option to add space for a hygrometer. In-spool locking: The one thing that bothered…
This is a slight modification of a great Drybox made by Dynarun to add a hygrometer in the front. You could also use my universal drybox plug to make it airtight when not in use. Required Parts Print basis.stl from this project, and all…
The original design is good. However, I am an engineer so I designed a few improvements for the design (make it more functional, less filament, repairable, etc) and saw several people in the original and remix comments had some good ideas…
Update 02/12/2021 I improved the model to be more robust and to be easier to customize. Thanks to the user nicktalavera for his ideas on this! Lid added! I also included a few prerendered STLs ready to be printed if you have an Ikea LACK…
Hydra Compatible 4.1 Model updated for Errors in model that someone reported bambulab 2 row desiccant holders, this works with a hydrometer and sits behind it as well in total you can fit 5 inside, 6 without the hydrometer and you do not…
Modeled in Fusion 360, face down, no need support. It has two “buttons” that will fit the left 2 holes at the back, so it stays in place. Angled up a little so you can look in from the top glass. The last firmware update allows you to use…
English Description of the 3D-Printed Desk Cable Pass-through: Purpose and Hole Diameter: The cable pass-through is designed to route cables neatly through an 80 mm hole diameter in desks, shelves, or work surfaces. Modular Design: The…
It's a thing you put in a 68mm diameter hole, so it looks nice if you stuff cables through it 🤷. It also adds a lid-thingy which prevents your cable(s) from falling back through the hole again. I made it for the Ikea PLATSA (HJÄLPA)…
Printed in PLA black to achieve a nice and strong print is printed facing down, textured and smooth beds are giving very differents finishes. Link to the thermohygrometer available on amazon:…
Modular desiccant/silica filament spool size container. Optional top to hold Hygrometer. I like to store one to five roles of filament in a ziplock vacuum seal bag. I wanted a desiccant holder that could grow or reduce depending on how…
Pretty much the same as: https://www.printables.com/model/67857-fast-print-in-spool-desiccant-silica-gel-container But increased the overlap to make the wall stronger without impacting print time. You can see this in the 4th picture that…
hygrometer holder under the shelf. Can be screwed under the shelf or just placed on the shelf. The hygrometer itself is inserted in the frame and the holder is screwed from the bottom of the shelf. The hygrometer frame can be easily…
Please consider leaving a like. or just take it and slink quietly out the side door. NOTE:- If you intend to keep the rubber strip that is already affixed to the printer frame (where the glass rests normally), then fitting the shallow…
Hygrometer stand, holder, for module.. Add open for battery
A simple print to allow you to insert a small round hygrometer into the lid of a Chef's Path brand cereal container for use as a filament drybox. The insert fits inside the top lid seal (since you won't be pouring anything out from this…
This small grommet allows you to use a presta valve in a Schrader valve hole without cutting or herniating the stem. I use Schrader-ready rims on all our touring bicycles because in the middle of nowhere, you never know what kind of tube…
This is a remix of @Raymond's ‘ Hygrometer house for Prusa Core One’ but instead of using the 20x5x2mm or 20x6x2mm magnets this uses (up to*) four 6x2.5mm round magnets (other magnets will work as well, like 2-3mm in height is confirmed…
changed the design a bit so it fits secure and doesn't move when handling the box thinned the walls a bit (seperate file) to accomodate a bigger spool (up to 66mm for bambu lab spools for example) WARNING! the walls are quite thin, handle…
A simple 2 piece grommet to neatly guide the power cable of the Prusa MK3S through the backplate of an IKEA PLATSA closet enclosure. Or any backplate that is 3mm thick. The diameter to drill in the backplate is 30mm. Inner diameter of the…
I Just made the lid with a hole instead of the original This way you can fit a round hygrometer/temperature meter in the lid, and keep an eye if the desiccant still is god, or if it needs to be dried some more you can find the hygrometer…
I had already designed a exhaust solution for the Adventurer 5m Pro ( Removable Exhaust Duct for FlashForge Adventurer 5m Pro by Simon | Download free STL model | Printables.com ), so wanted remove the exhaust filter and cover plate. I…
UPDATE 31/12/2022 A minor update to the design to make printing and fixing the magnets easier. Description A magnetic bracket for the thermometer/hygrometer, for the Bambu Lab AMS, ARC for P1P, and the airtight box. BOM 6x3mm magnets -…
These are a couple of grommets I made for my printer enclosure. I wanted a good way to feed the power cable and PTFE tube into the enclosure without having a hole that lets a lot of heat out. I printed mine in ninjaflex TPU (85A) but I'd…
The full spool filament desiccant container is designed to hold comfortably 2 pounds of silica gel beads (leaving 30% headspace in the spool). The idea here is to maximize the amount of silica gel in the AMS while minimizing the number of…
WHY? The existing AMS dryer pods by STprinting are great for the outsides. For the middle slot, I needed something to fit my Xiaomi Mija Hygrometer , of which I had a couple lying around. UPDATE v2 Based on your feedback, I strengthened…
Front loading desiccant boxes for AMS. These slide in and out without having to remove the filament to change out the desiccant and I also added a hole for an hygrometer. Hygrometer I used is 44mm in diameter…
Put a hygrometer into your favorite Silica gel spool container with this remixed cap. The hygrometer snaps into place, sits tight and secure and can also be removed. Height has been increased by 11.5 mm. With hygrometer inserted, the…
This design allows you to convert an off-the-shelf cereal box into a dry box for your filament, equipped with a hygrometer, removable jar of silica gel and a bowden-coupled output port. The box is hermetic and will maintain anywhere…
Grom is a brawny security guard with one weak point: the flashback he gets from his time working at a kindergarten. Those kids were merciless.
Stand for the round mini hygrometer / thermometer from Amazon or Aliexpress, that fits perfectly into the Bambu Lab AMS. It is slightly higher than other stands so that the humidity is measured close to the filament. I printed it in PLA…
Grommets! A few weeks ago(at the time of writing this) a grommet separated and came off my keychain. I searched far and wide for an STL because I don't want to buy a pack of 30 grommets and tools to set them just to fix this one old…
Print with round part lying down on the bed. 0.3 layer height , with a brim. No supports needed. Place to stand in the middle vertical slot of the AMS box
Use case / Problem description Monitoring the relative humidity in your filament boxes is essential. After a while the silica (or whatever you use to keep the air dry inside the box) will be saturated. Your filament will no longer be dry…
A simple small stand to hold the round hygrometer/temperature sensor. I needed a stand to place the hygrometer in my bathroom to check if hummidity levels are ok. I printed mine without supports with 0.20 mm and 15% infill. The Hygrometer…
The housing is for a rectangular hygrometer which you can place inside the Prusa Core One using either 20x5x2mm or 20x6x2mm magnets. Fits either left or right hand side of door, or any other place it will stick. No glue necessary to hold…
A grommet for feeding the starlink wire through a wall. There is a hard plastic option and a soft one.
Remixed version of a magnetic hygrometer mount for Bambu Labs X1/P1s/P1P printer with push-fit holes for 10mm magnets
This mount is for a round hygrometer thermometer from EEEKit which is very easily available on Amazon. The assembly is very easy with 4 pieces of 8x3mm magnets. Two are clipped inside the mount and two are attached to the plexiglass…
About This container holds small silica gel beads efficiently and securely. It is designed to print fast while still allowing for good airflow. There is an optional lid version that fits a hygrometer. Lids screw on easily and securely. 3D…
Desk grommets are a simple and inexpensive way to keep wires from cluttering your work surface. The flexible grommet option has a slit design to allow for even easier cable routing in different directions.
Easy to print angled mount for the JEDEW Hygrometer from Amazon.
I bought a pack of 8 of these hygrometers for a filament dry-box storage project and had few left over. I wanted to have one of the leftovers out next to the dry-boxes to show the difference between inside them vs outside. So this is a…
Replace the rubber grommet with a solid plate with a pass through for aio tubes. Print face down no supports
Shameless Money Grab: ;) If you feel like it, you can support my hobby here https://buymeacoffee.com/mke.dan
Remix of https://www.thingiverse.com/thing:6060534 so it fits on an E53 X5
Best if there are a couple of supports on the inside of the bolt section as the overhangs are a little more than what my printer could handle. Parameters start on line 438 When testing, use a small $fn such as 8. Using $fn = 512 took…
Sovol SH01 Filament Dryer PTFE Grommet The available grommets that I found did not line the entire filament path with PTFE tube so I created two options to solve this (see pictures for cross section): “Normal” - This was the original…
Hygrometer Case for AA or AAA Battery ✨ Now even smaller! ✨ These cases for a popular mini-hygrometer are designed to hold a long-lasting AA or AAA battery instead of its supplied button cell batteries. Compared to the two supplied LP44…
Cable grommet which screws into each other from two sides. Two models; one for ~4-6mm thick wood, one for ~10-14mm thick Used this on my camper. Might need to scale inside/outside part by 1% bigger/ smaller in X,Y to create extra…
Recreated based on PsychProd's basketweave/quasi-vasemode concept here , as well as its remixes (e.g. #5204468 , #5168851 , #4976590 ) and the cited prior works (e.g. #4508179 ). The idea is great, but perhaps it was limited by the method…
I got a new Steelcase Ology desktop with pre-drilled, 2 inch holes for cable management. Rather than pay $7 each for these at the home stores, designed one and printed. I printed mine in PLA on a Bambu Lab X1C with standard slicer…
I liked the OP's idea of using infill for the sides of the boxes. Dramatically reduces the print time, and still provides great functionality. Since I run a small print farm and needed to make parts for 8 AMS units, the reduced print time…
The model was made using screen shots from the film and modelled as close to the original as I could. The files include stl & 3mf of: The full model An upper and lower, which are split to make printing easier and to make the seam less…
Frog negromancer adventure miniature
Simple desk grommet for a ø60 mm hole, covers ø75 mm in total ø64 mm hole, covers ø79 mm in total, table top thickness 37.5 mm ø73 mm hole, covers ø88 mm in total Lid snaps into insert so it doesn't come loose. If you need another…
Description Openscad (https://openscad.org/) source code for creating 3D models of grommets that can be customised. The aperture, cable size, length, grips and other settings may be adjusted. The cable hole may be circular or slotted.…
Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)…
For those who want to cover a frayed, drilled hole in their desk. Diameters are according to holes drilled by means of saw rims with standard sizes of Ø 25 mm, 32 mm, 38 mm, 44 mm, 51 mm, 57 mm, 63 mm. The desk grommet/hole cover provides…
Printed Using 0.4 Nozzle Layer 0.2 Infill 10% Wall 3 Layer Button 3 Layer Top 3 Layer No Support Need Using Same screw (Optional) For nice flush on the glass add ironing
Remix - This design allows you to convert an off-the-shelf cereal box into a dry box, equipped with a hygrometer
A simple stand for Veanic hygrometer, because I couldn't buy just one. Print Settings Printer Brand: Monoprice Printer: Select Mini Rafts: Doesn't Matter Supports: Yes Filament: 3D Solutech PLA White Category: Gadgets
The inside diameter of the grommet is 2.5". The hole on the cover plate is 1" diameter. Supports needed on the grommet to support the chamfered edge and inside tabs as well as on the cover plate to support the locking tabs. Print Settings…
I couldn't see the numbers on the hygrometer very well inside the enclosure so I made up a couple stands for them. The models have a hole in the back for airflow to reach the sensors. This is the link to buy the hygrometers…
Fits pretty much any standard-sized 28x47mm clip-in hygrometer or thermometer. There are two versions. One as a free-standing 45° angled stand and one that is made to be sticked to a clear container (filament storage/larger drybox) using…
This is a replacement cap for the Chef's Path Airtight 135.2 oz. Cereal Storage Container that will allow the addition of a Hygrometer and a PC4-M6 or PC4-M10 Pneumatic Fitting. to make a Filament Dry Box Container. The hole for the…
What you need electric drill 80mm holesaw Dimensions Diameter: 80mm Height: 50mm Material Material: PLA/PETG Layer height: 0,2mm Support: no Brim: optional Instructions Print the shell, it fits all inserts Drill a 80mm hole to your desk /…
Model is designed to hold a hygrometer safely in the chamber of the Bambu X1 Carbon. Please double check that your side support has the stamped cavity before printing. The holder is designed to snap onto that cavity to stay secure.…
Honeycomb Storage Wall Mounts for some common Thermometer / Hygrometers: Xiaomi Mijia Aqara WSDCGQ11LM Common Rectangular Hygrometer All print in given orientation without supports. ♥ Looking forward to your makes! ♥
A grommet to improve the appearance of the entrance of cables being passed behind the wall. For 1.5" hole and .5" cable cutout.
I was adding LED lighting to my IKEA Lack Enclosure and wanted a clean way to pass the cable outside the enclosure. I created this cable management grommet for this purpose. The grommet will fit into a 1/2 inch hole in the enclosure and…
I had a handful of spare Weewooday brand hygrometers (bought on Amazon) that I decided to put to use to monitor conditions in my print room. They pop right into the bracket and are indexed by slots in the back to prevent them from…
Here's my door handle with hygrometer design for the Anycubic Kobra S1. It can be used like standard screws. ---- Hier mein Türgriff mit Hygrometer design für den Anycubic Kobra S1. Es können wie Standartschrauben verwendet werden.
Thickened the side walls that hold the hygrometer. The one I printed with the latest Bambu Studio had no side walls until I checked “Detect thin walls”, but it still fell apart before I could assemble it. Also added a ledge so it snaps in.
ENG Horn cover for Honda Monkey/DAX/MSX/GROM 125 I recommend printing from a more durable material I recommend printing with supports I will add more over time CZ Krytka klaksonu pro Hondu Monkey/DAX/MSX/GROM 125 Doporučuji tisk z…
A stand designed for the temperature and humidity meters often found in online stores. It replaces the stock case to deliver a clean, ultra-minimalist look. Required other than printed parts: 1x Thermometer/hygrometer Disassembly…
A simple stand for a common Humidity/Temperature sensor. These sensors are widely available from eBay, Banggood, AliExpress for around 3 USD. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: No Supports: No…
Yet another desiccant container that fits securely inside of a Prusament spool. It holds 2+ mm indicating silica gel and a generic round hygrometer to measure temperature and humidity.…
Filaments like TPU and PETG need drying for the best 3D printing results. Even with dedicated filament dryers, the vents allow moisture to absorb back into the filament quickly. Since it takes hours to dry, it is inconvenient to dry every…
