1 / 8
Bambu Lab AMS Silica Pod for Xiaomi Mija Hygrometer — zdjęcie 1
1 / 8

Bambu Lab AMS Silica Pod for Xiaomi Mija Hygrometer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This remix allows you to mount your Xiaomi Mija Hygrometer to monitor the air inside your Bambu Lab AMS.

Ocena
4,8 / 5
Polubienia
93
Pobrania
632
Wydruki
15
Wyświetlenia
3240
Oceny
15

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

WHY?

The existing AMS dryer pods by STprinting are great for the outsides. For the middle slot, I needed something to fit my Xiaomi Mija Hygrometer, of which I had a couple lying around.

 

UPDATE v2

Based on your feedback, I strengthened the grid underneath the hygrometer.

 

DESIGN

I remixed STprinting's design, but kept the overall dimensions. To make the hygrometer stick, I closed a couple of gaps to attach double sided tape. The whole pod still prints without supports.

 

SETTINGS

I used PLA with 0.16mm layer height. Make sure to Z-hop properly to avoid the fragile columns to break off. Here are my detailed settings:

  • 0.8mm retraction length
  • 0.4mm Z hop when retracting
  • Spiral type
  • 30mm/s retraction speed
  • Activate “retract on layer change”
  • Activate “Avoid crossing walls”

 

ADDITIONAL MATERIAL

A Xiaomi Mija Hygrometer and some double sided tape like this M3 tape (affiliate links).

Tagi