Apple Mac Power Adaptor, Generic and Power Board Hangers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part mounts apple power bricks with extensions as well as generic power bricks and power boards to a vertical face.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 42
- Wydruki
- 1
- Wyświetlenia
- 341
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
This set allows you to hang power boards, apple chargers with extensions and generic power adaptors to vertical surfaces like desk legs or cabinets.
Build Notes:
I printed these in PLA without support and used self tapping wood screws to mount them to the bottom of my desk.
The powerboard L, M and R parts are Left, Middle and Right and depending on which board you have will determine which combination of parts you need. It was designed for an Australian board with 7 along one side and 5 along the other with 3 double spaced plugs and to grab onto both sides of the reinforcing bar of the desk so the thickness of that will matter.
I rendered the cover image in Vectary.