NES Controller Back for ProMicro Type-C
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NES rear panel adapted to support a ProMicro (Arduino Leonardo) Type-C to be used w/DaemonBite SNES/NES USB sketch
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a rear panel for the original NES controller with space and cutout to accommodate a Type-C Pro-Micro (Arduino Leonardo) micro-controller. This has been tested with a reproduction NES controller, but it should work with an original controller as well. I made this to utilize the excellent DaemonBite NES to USB sketch which allows you to plug your NES controller into your PC to play emulators or other games with a classic controller.
Follow instructions on programming and wiring the controller here: https://github.com/MickGyver/DaemonBite-Retro-Controllers-USB/tree/master/NESControllersUSB
I didn't really have a good way to secure the ProMicro board in this build, so I ended up just hot gluing into place. Your mileage may vary.
Recommended to print with tree supports for the backside screw holes. They should remove relatively easily.