Feed Eggs Game Model from "I Think You Should Leave with Tim Robinson" with Magnetic Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A model of the Feed Eggs game as featured in the Netflix comedy "I Think You Should Leave with Tim Robinson"
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 299
- Wydruki
- 1
- Wyświetlenia
- 1413
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
More or less as featured in Season 3 Episode 2 of “I Think You Should Leave with Tim Robinson”, its the Feed Eggs game in physical form! Sadly, no bush is included.
Magnets are used to hold the creature and basket to the base, but they are not required.
MAGNETS ARE NOT REQUIRED:
You can make the entire print with no magnets, just make sure to enable support to fill in the internal holes left for the magnets, and then the print should work fine, although you will need to glue the basket and creature to the base.
IF YOU WANT TO USE MAGNETS:
The print is designed to fully enclose magnets, so make sure to include support blockers around the feet and bottom of the basket, as well as the entire main section of the base. The magnets this model fits are 3 5mmx3mm magnets which are easy enough to find (2 for the creature, and one for the basket) as well as 3 10mm by 2.3mm magnets for the base. I used these https://a.co/d/2Jn6XiB for the base, and I'm not sure if there are others that worked.
Mine was printed using 15% infill and a layer height of 0.1mm. I also recommend you enable Ironing for the base to make the top look better if you aren't planning on painting your model.
You will need to print one Creature, one Basket, one Base, and around 10 or so of the eggs depending on how full you want your basket to be.