Air Venturi Avenger Barrel Stabilizer Factory Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Air Venturi Avenger Barrel Stabilizer Factory Replacement
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 641
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
NIRINIUMLABS | Air Venturi Avenger Barrel Stabilizer Factory Replacement
Destroyed my factory avenger barrel stabilizer installing barrel after trying to accurize the platform, the model is designed for a M3 threaded insert (all I had on hand) and M3 grub screw. I can upload an M4 threaded insert version to use factory grub screw.
NOTE: I had to take a rotary tool and clean up from the inside where the barrel goes (filing threaded insert down to match profile of 3d print, getting some hanging on the barrel before shaping. I recommend some superglue on top of the insert so it wont pull back out as well. Use a file to shape stuff as needed. Use the factory o-rings or similar (use silicone grease or oil for lubing them).
Any questions please leave a comment, enjoy!