P
Printables
Sleds feet for Accu-Tac SR5 bipod clone
Those bipod sled feet are designed for a chinese clone of Accu-Tac SR5 QD bipod. After printing, you need to tap the screw hole with M5-sized tap. Model made with Blender (with CAD Sketcher addon)
Wyniki wyszukiwania: bipod
Liczymy pasujące modele…
P
Printables
Ruger Target lite Bipod adater.
This adapter(convertor) is for Ruger 10/22 Target Lite to mount an CVlife adjustable 7.5–9inch rifle bipod. Since the stock on this rifle has a non-standard, flat profile, this adapter is needed. I think it should work with other bipods…
P
Printables
Longer Bipod Legs (Read Description)
These may be too flimsy for use (Thank you Gabriel_4178917 for the feedback). I myself have not printed/tried these as they were made in response to some others critiques about the legs being to short. I would recommend printing at 5…
P
Printables
Ruger PCC picatinny bipod adapter
Front picatinny to 20mm clamping bipod adapter. After print, drill through hole with 6mm drillbit and fit apropriate hardware for re-enforcement. Rear nut groove is for a 10mm nut and other side is also 10mm (i had to drill also that side…
P
Printables
VirtualBoy Bipod Medallion Remix
Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 50+ Supports: No Print Orientation: Default as modeled
P
Printables
Mickey Frame Bipod Stand
Uses the model's existing nail hole to prop the frame up. Prints in less than 10 minutes on a Core One
P
Printables
Harris pic rail bipod knob
This is a knob attachment for Harris picatinny mounted bipod. Allows you to hand tighten the mounting nut This will require the use of a soldering iron to heat set the knurled nut into the printed part. print in orientation shown
P
Printables
Bipod for air rife
Bipod for air rifle. Made for my son who can't hold a rifle by himself yet. Layer height: 0.10 mm
P
Printables
Adjustable Nerf Bipod (BETA, Not Currently 100% Functional)
Adjustable bipod powered by bungee cords intended to be put onto Nerf blasters. The legs are adjustable by a clip which interacts with some rungs on the rotating legs, this part is fully functional. There are two orientations you can…
P
Printables
Sleds feet for Accu-Tac SR5 bipod clone
Those bipod sled feet are designed for a chinese clone of Accu-Tac SR5 QD bipod. After printing, you need to tap the screw hole with M5-sized tap. Model made with Blender (with CAD Sketcher addon)
P
Printables
Nerf Bipod
I designed this foldable, springloaded Sub- Picatinny Bipod for nerfing. Sleek, slim design with the curved long slot serving as end stops. Hardware used: M2 or M2,5 for the end stop bolts M3 to secure the Joint and the foot to the leg…
P
Printables
Bipod Mount for Picatinny Rail
Mount for bipods. The normal version fits on normal picatinny rails and the short one is especially for:…
P
Printables
airsoft bipod (foldable)
Everything can be printed, except: two M4 screws and nuts the two rubbers for stabilization plastic adhesive You'll need one "befestigung", one "stabrechts" and one "stablinks". Furthermore you'll need two objects of "stabverbingung", two…
P
Printables
Magpul Bipod Picatinny Clamp Replacement
I did a silly goof and lost the clamp thingie of my Magpul Picatinny Bipod and needed a replacement. I used a buddie's Bipod for taking measurements. Note: this replacement part is not intended for serious long time use. It is designed to…
P
Printables
Magpul Picatinny Bipod Thumb Screws
I wanted to be able to attach/remove my Magpul Picatinny Bipod quickly and without tools, so i came up with this thumb screw and had it turned by a local company. Please note: this is not meant to be 3D-Printed. In a pinch, printed screws…
P
Printables
Magpul Picatinny Bipod Thumb Screws STEP File
I wanted to be able to attach/remove my Magpul Picatinny Bipod quickly and without tools, so i came up with this thumb screw and had it turned by a local company. Please note: this is not meant to be 3D-Printed. In a pinch, printed screws…
P
Printables
Flexture Joystick Bipod
This is a novel design for a printable joystick bipod that utilizes compliant mechanisms (flextures) for movement control. Design The mechanical design of the flexture allows for fine grain control of vertical and horizontal movement via…
P
Printables
Trimble bipod replacement bits
I had a half functioning Trimble bipod that required some additional bits. A quick measure up and a bit of design in Fusion 360 and its now working great. Prints were done in PETG and are working great. The button measurement is 20.75mm…
P
Printables
Spare part for a China bipod replica - Ersatzteil für ein China Zweibein Nachbau
The mount on my bipod from China broke after a short time and I could no longer use it. I reconstructed the part and it works like the original. I used ABS as the material and I don't think it will work with PLA. Bei meinem Zweibein aus…
P
Printables
Nerf Bipod Attachment REVISED
Slightly better than the original version I made a while back, can be used right after being taken off the bed. Basic model has 100mm legs while the longer version has 150mm legs. Might make a stronger version that can use pipe or dowel…
P
Printables
dvojnožka-swivel bipod
2ximbus M4x35+2x matice M4 2ximbus M6x25+2xmatice M6 1ximbus M8x40 matice bezpečnostní M8 alu trubka 15x1x 270mm 2xkulička D5 2xpéro D5x1,25x10mm 6ot
P
Printables
Zweibein Kaliber .47 (12mm) - Bipod .47 in / 12mm, magnetisch
Teile für ein einfaches Zweibein für magnetische .47 inch / 12mm Aufnahmen, z.B. für Blaser oder Spartan. Filament TPU Shore 98A 0,4mm Düse 0,25mm Schichthöhe (Structural) Infill 20% geradlinig Benötigter Magnet: Stabmagnet Ø 8,0 x 20,0…
P
Printables
The CPod, a lightweight and adjustable picatinny bipod made with CF tubes
I couldn't find any printable bipod that was both strong and didn't require excessive hardware, so I designed my own. The goal was to minimize the amount of fasteners used, print all required springs as compliant mechanisms, and make it…
P
Printables
Bipod for Picatinny extended for rifle.
check origional for guide, but its fairly straightforward.
P
Printables
Keystone State Arms Crickett 22lr bipod pic-rail/mount
Keystone Sporting Arms Crickett bipod mount. I removed the sling adaptor, and added some screws and nuts I had. Its very solid, no flex, very durable. Could be used for flashlights, grip, whatever. Printed with PETG CF, 25% infill, 4 walls.
P
Printables
M249 Front bipod adapter (airsoft)
A bipod adapter to use any generic bipod on your airsoft M249. Tested on CA, should fit A&K. Maybe G&P. Does NOT fit Specna (thanks Fandaboi)
P
Printables
Mlok to Arca adapter plate for Amazon bipod
I bought an Amazon bipod last year, for Mlok mounting. Now I want to have an Arca rail mounted bipod. So I bought an Arca clamp on AliExpress , but to mount it on the bipod I needed an adapter. So I designed this one. It fit's this Amazon…
P
Printables
Pica Tinny Rail to Bipod / Tripod / Shooting Sticks Adapter
My co-worker was about to buy one of these for $40+. I casually mentioned that we could probably make one with a little bit of luck. Lo and behold, here's the product. A Picatinny (Pica Tinny?) mount with a camera tripod mount threading…
P
Printables
Umarex NOTOS hand guard with picatinny rail for bipod or light
Umarex NOTOS picatinny rail , full length with block screw tab to fix it to the rifle. A more refined version of my first one. Now uses the block screw to attach . Slips over air cylinder on the Umarex NOTOS air rifle adding a pic rail to…
P
Printables
MLOK Harris Bipod Mount
Print on it's side, with supports, to ensure maximum durability of the loop.
P
Printables
AIRSOFT CYMA RPK bipod repair
On the RPK CYMA CM.052, the bipod attachment to the barrel broke into several pieces. It is irreparable because it is made of an aluminum alloy that is not very strong... and CYMA spare parts are very rare. So I recreated the part. My…
P
Printables
Bipod Storage Rack
A practical storage solution for organizing multiple bipods in a compact vertical arrangement. This stand features a sloped front rail with an integrated ridge that prevents bipods from sliding off the front, while a flat wing backstop at…
P
Printables
Umarex Notos Bipod Grip (Man Of Sport and Leisure Remix)
This grip for the Umarex Notos airgun has dual functionality for precision shooting with its 5 position adjustable bipod and vertical angled foregrip. The optional foregrip provides improved ergonomics and control for off hand shooting.…
P
Printables
Ruger Target lite Bipod adater.
This adapter(convertor) is for Ruger 10/22 Target Lite to mount an CVlife adjustable 7.5–9inch rifle bipod. Since the stock on this rifle has a non-standard, flat profile, this adapter is needed. I think it should work with other bipods…
P
Printables
Longer Bipod Legs (Read Description)
These may be too flimsy for use (Thank you Gabriel_4178917 for the feedback). I myself have not printed/tried these as they were made in response to some others critiques about the legs being to short. I would recommend printing at 5…
P
Printables
Nerf Bipod
A simple three piece bipod for Nerf blasters! Simply insert legs into main piece, or just use main piece as a short bipod. Print one main piece and two legs. Should fit all nerf rails. I printed mine in PETG @ 0.3mm layer height.
P
Printables
Ruger PCC picatinny bipod adapter
Front picatinny to 20mm clamping bipod adapter. After print, drill through hole with 6mm drillbit and fit apropriate hardware for re-enforcement. Rear nut groove is for a 10mm nut and other side is also 10mm (i had to drill also that side…
P
Printables
VirtualBoy Bipod Medallion Remix
Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 50+ Supports: No Print Orientation: Default as modeled
P
Printables
Mickey Frame Bipod Stand
Uses the model's existing nail hole to prop the frame up. Prints in less than 10 minutes on a Core One
P
Printables
Airsoft accesories - L96 bipod
Model used for full play outside - Print in PET-G or ABS in full as you need resistance
P
Printables
Bipod Mount for Shinkansen Smiley
Mount for Parker's Adjustable bipod for the Shinkansen Smiley. Makes use of the holes in the front end for heat set inserts. It's designed for m3 screws, length dependent on the type of heat set inserts you put in. Please check the…
P
Printables
WonderWand WonderLoop Antenna (both version) holder and bipod with optional callsign
A holder for the WonderWand WonderLoop portable QRP antenna. This provides support so that the antenna is not hanging off of your radio's antenna connector. There are two holder models, so you do not need to print both. They are for the…
P
Printables
Nerf Bipod Upgraded
Some small upgrades to the original Nerf Bipod by Ttotheman STL pre oriented to recommended print orientation Changes: Added m4x6x8 heatsets to connect joint to bipod + feet to leg (adds robustness) adds optional 5x3mm tube to strengthen…
P
Printables
Magpul Bipod for M-LOK to Swivel Studs Adapter
Press M-LOK t-nuts into the bottom of the adapter. Mount the adapter to your stock using the outer holes. The outer holes accept machine screws that fit your swivel stud holes. Try to find button-head screws as they will have a low…
P
Printables
No Hardware Picatinny Bipod
combined two models and made the legs thicker The lock block is too loose
P
Printables
Low hardware picatinny bipod for airsoft/airguns
This is a shortened version of Tony's bipod on MakerWorld. The reason I shortened it is so that it is possible to use it in a prone position without shooting the treetops :P The original model can be found here: Rifle Bipod 200mm with…
P
Printables
No Hardware Picatinny Bipod 2
The collab we've all been waiting for, Bruce LeedleLeedleLeedleLee x Bruce LeedleLeedleLeedleLee
P
Printables
Bipod Air Rifle (with stock) Support - Adjustable
Print in 0.16mm layer, 5mm brim no support except for: The slider - print on side with the hole rising through the model and support the angled tip. The stock support - lay on side, support to the overhanging section that is not sat on…
P
Printables
Peanut Prism Mini Bipod
Parts List: m6 nuts - 4 m6x30 bolt - 2 m6x40 bolt - 2 Print Instructions: Add a pause in the g-code at the top of the nut cavity in the base.stl so that you can insert two m6 nuts and continue the print, encasing the nuts into the part.…
P
Printables
Low Hardware Bipod (Picatinny for Nerf and Airsoft)
A fairly simple bipod that uses some elastic cord to have bistable legs (The legs have two resting places) you will need some 4mm or 5/32" elastic cord I also made some actual instructions!
P
Printables
Vases "Bipode" (x5)
Licence commercial. Thangs.com Paramètres d’impression 3D Sans supports Imprimé en PLA. Remplissage : 5 / 15% Épaisseur de couche : 0.2 Temps moyen d'impression : XL Grand : 6h XL Petit : 5h Haut : 4h Bas : 4h Mini : 3h Dimensions : XL…
P
Printables
Pellet Pod - Clamp on bipod for air guns with 16mm barrel
This is a remix of the bi-pod ( https://www.thingiverse.com/thing:1478754 ) as designed by Martialmedia but now for a 16 mm barrel. I also increased the thickness of the "pivot points" to make it a bit more sturdy You will need a M4 bolt…
P
Printables
Vertical foregrip bipod insert for rail
bought a foregrip bipod off wish for dirt cheap and it didn't come with the insert for a picatinny rail so I made one. printed rail down with supports held in with super glue. Category: Hobby
P
Printables
Picatinny rail on silencer Hatsan MOD 25 Super Tactical for installing bipods.
Всем привет. Нарисовал два вида крепления Пикатинни на глушитель пистолета Hatsan Mod 25 Supercharger https://www.e-katalog.ru/HATSAN-MOD-25-SUPERCHARGER.htm На данную планку можно установить сошки которые можно сложить или разложить при…
P
Printables
Arca Rail Bipod Adaptor Updated
I just installed an Arca Rail on my NRL22 rifle. My Bipod used a Sling stud mount and I when putting an arca quick release on there was a bit of a gap that I figured would possibly cause the mount to shift if it loosened up at all. So I…
P
Printables
Picatinny rail on silencer Hatsan MOD 25 Super Tactical for installing bipods.
Всем привет. Нарисовал два вида крепления Пикатинни на глушитель пистолета Hatsan Mod 25 Supercharger https://www.e-katalog.ru/HATSAN-MOD-25-SUPERCHARGER.htm На данную планку можно установить сошки которые можно сложить или разложить при…
P
Printables
Hatsan Flash QE Bipod
Fixed Bipod for Hatsan Flash QE PCP Air Rifle. No extra tools or hardware required to install. This design is not meant to fold up, but comes off the rifle easily enough. Bipod slides on to the front Picatinny rail and is held in place by…
P
Printables
Bipod
-= Русский =- Сошки для пневматической винтовки. Все отверстия сделаны для винтов М3 и гаек М3. -= English =- Air rifle bipod. All holes are made for M3 screws and M3 nuts. Category: Sport & Outdoors
P
Printables
No-supports M-LOK Folding Bipod
This is a printable bipod suitable for light duty, such as an air gun or 22LR. I based the design loosely on the Magpul bipods but there are some notable differences. I have prioritized compactness, as this bipod is intended to be used on…
P
Printables
Bipod for picatinny
Print the feet in as soft TPU as you can, I printed mine with 60A TPU from Recreus, the softer the better the grip. The M3 screws will thread itself. BOM M5x20 2pcs - For legs M5 Locking nut 2pcs - For legs M5x40 1pcs - For picatinny M5…
P
Printables
Crosman 2240 Picatinny for bipod or laser
Use two M3x10 Caphead screws and two nyloc nuts I had problems printing this with Arachne enabled and my 0.4 nozzle, the perimeters didn't fuse, so I had to use classic perimeter generator.
P
Printables
Bipod for picatiny (retractable)
-remixed model - stronger and more massive body, resized bolt and nuts holes, remixed foots //3.1.2023 now printing model for test //4.1.2023 tested result OK, added photos. -Hardware needed: M6x20 2pcs - For legs M6 Locking nut 2pcs -…
P
Printables
Antenna wire Bipod
Bipod can be used to hold counterpoise wire for Buddistick or buddipole. fits into buddistick pro carrying case. can also be used to hold wire antenna ends off the ground. using 3/8" x 4ft fiberglass rod post (I purchased mine at tractor…
P
Printables
FX Dreamline Bipod Mount with Picatinny Holder
FX Dreamline Bipod Mount with Picatinny Holder / This adapter does not require screws.
P
Printables
MTNGear Backcountry Bipod Clip
Keep the legs of a MTNGear Backcountry Bipod secure and stop them from making any noise.
P
Printables
Nerf Bipod Attachment
A nerf bipod attachment that I made a few years back, not my best work but it serves its purpose
P
Printables
Bipod Mount for Umarex Hammerli Hunter Force 900 Combo with Picatinny Rail
I needed to make a bipod mount for my Umarex Hammerli Hunter Force 900 Combo airgun. I downloaded the bipod from here: https://www.printables.com/pl/model/357606-bipod-for-picatiny-retractable/comments I made three variations of the…
P
Printables
War Caster (Adjustable Bipod)
The developer, “Blinsky's Toys” continues to spread joy throughout the world by bringing you a brand new toy. The “War Caster” is an adjustable bipod designed to attach to a picatinny rail and fold out of the way for storage. That means…
P
Printables
Picatinny Low Hardware Bipod
Its a bipod. only hardware needed is a m4*25 nut and bolt the legs also fold. yay
P
Printables
Tripod / bipod for airgun
Airgun tripod because guys can't hold a gun. M6 threaded rods from the store. Estimate and cut with a saw as needed. Self-adhesive foam rubber holds the tripod on the rifle. Possible modification for a bipod. NOW it's a sniper gun for…
P
Printables
Elecraft AX1 / AX2 Antenna Bipod Clip & Knob
The stock Elecraft AX1 and AX2 clip for the bipod is very stiff, difficult to attach, and hard to remove. At the request of a fellow op, I designed a better one. Here it is. Print in PETG for flexibility and durability. Print the clip…
P
Printables
Logitech Streamcam bipod
Logitech Streamcam bipod Use the original streamcam laptop mount as a desktop bipod ^^ Pass the mount through the shirt and slide the legs. Cam can tilt and pan, as if it was a neck. No screws, no magnet, slide in place.
P
Printables
Bipod / Tripod foot to suit BOG gear tripod
Bipod / tripod foot to suit BOG gear tripod. Mimics basic shape and function of the original foot when the extendable leg was lost / broken. Designed to be a tight press-fit interface with the ID and OD of the main tube. Printed with…
P
Printables
M9 Bayonet with bipod
I made a M9 Bayonet with a bipod inspired from Battlefield Friends / Battlefield 4. The bipod is attachable with two screws. The knife is only inspired by a M9 Bayonet and not a 100% correct model. Things you need in addition to the 3d…
P
Printables
Bipod for a rifle
Bipod for a rifle Print Settings Printer Brand: Creality Printer: Ender-3 S1 Rafts: No Supports: No Resolution: 100% Infill: 20% Filament: PLA PLA BLACK Category: 3D Printing
P
Printables
Atlas Bipod Tension Wrench
Atlas Bipod Tension Wrench - You ever lost one of these at $40 a pop? I have, print one and lose pennies instead.
P
Printables
Harris Tilting Bipod tilt lock lever
Harris Tilting Bipod tilt lock lever for the new style large diameter ribbed knob. Hardware: 1x M4x20 button head cap screw 1x M4 nylock Please see my other designs for a lever for the old style small knob.
P
Printables
Harris Bipod tilt lock lever OLD style knob
Harris Bipod Tilt lock lever for the old style small knob Hardware: 1x M4 x 18mm button head cap screw 1x M4 nylock Please see my other designs for a lever for the new style of knob.
P
Printables
Bipod for Airsoft Zastava Varmint M70 Sniper Rifle
This is a simple yet effective bipod for my arisoft sniper ASG Zastava Varmint M70. I made this using Solidworks 2016 and it works very good until now. It could be used on any sniper rifle like VSR10,Varmint M70 etc or with any sniper…
P
Printables
Harris pic rail bipod knob
This is a knob attachment for Harris picatinny mounted bipod. Allows you to hand tighten the mounting nut This will require the use of a soldering iron to heat set the knurled nut into the printed part. print in orientation shown
P
Printables
Magpul bipod replacement feet
Swiveling feet for magpul bipods. Files are in STEP. so you can modify the attachment point and feet to your needs. Printed in Petg with 30% infill. With supports. Havent tested the durability yet. BOM 2x M3x20 socket head screw 2x M3…
P
Printables
Copepod HabiPods
This is my take on the popular Copepod hideout that hopefully aims to increase printability while maintaining a safe and accessible sanctuary for Copepods when placed in a reef tank. This is version one, and I recommend increasing…
P
Printables
G&P M249 Rail Bipod Adapter
Heavily modified version of the A&K Adapter since that one wouldnt fit on the G&P model in multiple dimensions. Field tested and extremely sturdy when printed (at least almost) solid.
P
Printables
Notos Bipod Mount And Handguard
Flip 180 degrees for ease of printing. Required 3 heat set inserts and 3 M3x20 screws. Secure with 3m double sided tape to prevent from rotating
P
Printables
KeyMod Bipod Mount
Prints in two pieces for ease and strength. Requires (2) KeyMod rail hardware commonly found on Amazon/eBay.
P
Printables
AX1 Bipod legs
These are bipod legs that work with the AX1 clamp that was created be K6ARK. you can find the clamp here on pintables. https://www.printables.com/model/626212-elecraft-ax1-ax2-antenna-bipod-clip-knob
P
Printables
Accu-Tac bipod G2 spike feet
Maybe you've got a tonne of cash and absolutely splurged when you purchased your Accu-Tac bipod. It's awfully tempting since they're an absolutely awesome piece of gear. … but maybe you really were stretching your budget and removed a…
P
Printables
bipod (pl dwójnóg)
PL- wykonany do wiatrówek by zamontować go do obręczy od lunety 22mm do lufy. różnice- poprawiony rozmiar otworów, zmiana typu umieszczenia.