Umarex Notos Bipod Grip (Man Of Sport and Leisure Remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Foregrip for umarex notos with tube cover and integrated adjustable bipod.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 786
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This grip for the Umarex Notos airgun has dual functionality for precision shooting with its 5 position adjustable bipod and vertical angled foregrip. The optional foregrip provides improved ergonomics and control for off hand shooting.
Hardware:

Video of the bipod folding functionality:

The bipod can be stowed fully up so the legs stick out in front of the airgun, ideal for storage and standing rest shooting from high surfaces:

Assembly notes:
The flathead m5 screws for the tube foregrip need to be very flat to clear the air tube. If they don't clear the tube, tweak the fitment by grinding down the heads of the screws or setting a bit deeper into the tube grip with some heat until they lay flat enough for clearance.
You want the bipod leg insert to be as tight as possible inside bipod main leg so no wiggle. So experiment with some minor upscaling and sanding if too loose
The two M5X20's that attach (bipod main leg + bipod adjust wheel + notos tube grip with bipod mount) should be tight enough that it takes some good force to move the legs and it locks in without wiggle. They should be equal tightness
The spring loaded M5X25's need to be socket head screws, as the round geometry is the locking point with the bipod adjust wheel. Works best if the socket heads have a ridged texture and not smooth so it bites in better.
Material Notes
Bipod adjust wheel has most crucial material hardness requirements because it interfaces with a metal screw to lock in place. Recommend printing this part in a tough engineering filament like PA6-CF or PET-CF17 or else it will eventually get worn down. Everything else can be PLA