1 / 5
Low hardware picatinny bipod for airsoft/airguns
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a shortened version of another bipod design
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 376
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
This is a shortened version of Tony's bipod on MakerWorld. The reason I shortened it is so that it is possible to use it in a prone position without shooting the treetops :P
The original model can be found here: Rifle Bipod 200mm with Picatinny rail complete kit - Free 3D Print Model - MakerWorld
You will need an M3x30 screw with a locknut for the base and two M6x20 screws for the legs.
P.S. If you like the howling wolf spray painted on the stock you can find the stencil here: