Nerf Bipod Upgraded
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
Some small upgrades to the original Nerf Bipod by Ttotheman
STL pre oriented to recommended print orientation
Changes:
Added m4x6x8 heatsets to connect joint to bipod + feet to leg (adds robustness)
adds optional 5x3mm tube to strengthen legs (adds stiffness/strength)
swaps m2/m2.5 to m3 for end stop bolts (adds strength, m2/2.5 bend easily)
adds 2 leg extensions, +4cm and +8cm (longer is better)
Updated hardware list (see step for more detailed locations):
4x M4x6x8 heat sets for bipod body + legs
4x M4x16mm bolts for joint to body, foot to leg
4x M3x20 bolts for end stop bolts + joint to leg
4x M3x8 for spring attachments
2x 10mm OD, 1mm wire diameter- extension springs (60mm unstretched length). Doesn't need to be exact, just closeish
(optional) 5mm OD x 3mm ID tube. 200mm for +8cm, 160mm for +4cm, 120mm for regular. aluminum/carbon fiber/whatever really
Shown above with the +8cm legs, with carbon fiber reinforcement in the legs