Nerf Bipod Upgraded
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Some small upgrades to the original Nerf Bipod by Ttotheman
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 18
- Makes
- 0
- Views
- 290
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial
Some small upgrades to the original Nerf Bipod by Ttotheman
STL pre oriented to recommended print orientation
Changes:
Added m4x6x8 heatsets to connect joint to bipod + feet to leg (adds robustness)
adds optional 5x3mm tube to strengthen legs (adds stiffness/strength)
swaps m2/m2.5 to m3 for end stop bolts (adds strength, m2/2.5 bend easily)
adds 2 leg extensions, +4cm and +8cm (longer is better)
Updated hardware list (see step for more detailed locations):
4x M4x6x8 heat sets for bipod body + legs
4x M4x16mm bolts for joint to body, foot to leg
4x M3x20 bolts for end stop bolts + joint to leg
4x M3x8 for spring attachments
2x 10mm OD, 1mm wire diameter- extension springs (60mm unstretched length). Doesn't need to be exact, just closeish
(optional) 5mm OD x 3mm ID tube. 200mm for +8cm, 160mm for +4cm, 120mm for regular. aluminum/carbon fiber/whatever really
Shown above with the +8cm legs, with carbon fiber reinforcement in the legs