1 / 3
Magpul Bipod for M-LOK to Swivel Studs Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter allows you to mount a Magpul Bipod for M-LOK to a rifle stock with two front swivel studs.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 1090
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
- Press M-LOK t-nuts into the bottom of the adapter.
- Mount the adapter to your stock using the outer holes. The outer holes accept machine screws that fit your swivel stud holes. Try to find button-head screws as they will have a low profile.
- The bipod should press-fit into place and accept the M-LOK screws.
Photos show a light blue adapter attached to a rifle; light blue was chosen for prototype purposes. This version was printed in PLA. The grey version has been printed in PETG. Both have withstood a hundred rounds each without signs of breaking.
Important: Print at 100% infill. Otherwise you will get de-lamination when you load the bipod.