DJ Belt Accessories ==[-]====
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Get to your gig prepared with these DJ belt accessories.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 394
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
Keep your songs close by with this USB holder. Tapered holes hold two USB sticks securely so 🎵 you can dance if you want to, ‘cause you won’t leave your songs behind 🎵
Files:
💿 v1_usb_holder.stl
Recommended settings:
💿 0.4mm nozzle
💿 0.2mm layer height
💿 15% infill
Ring Ring. Who's that? Not your ears! You'll never forget your ear protection again when you wear this belt mounted holder. Carry your ER20's, or stuff it with foamies as a back up. Feel that click as you close the lid? Perfection.
Files:
💿 v1_ear_pro.stl
💿 v1_ear_pro_cover.stl
Recommended settings:
💿 0.4mm nozzle
💿 0.2mm layer height
💿 15% infill
The bride and groom spares no expense for their big day, but they still ain't paying for an MC. No problem. Keep a mic on your hip with this mic holder. Flip it up, out of your way, when not in use.
Files:
💿 v1_mic_holder.stl
💿 v1_mic_holder_clip.stl
Recommended settings:
💿 0.4mm nozzle
💿 0.2mm layer height
💿 15% infill
💿 Supports for clip only
Sometimes, there just isn't a spot to set your headphones when you need one. Hang them on your hip with this belt-mounted headphone holder.
Files:
💿 v1_headphone_holder.stl
Recommended settings:
💿 0.4mm nozzle
💿 0.2mm layer height
💿 15% infill
AI use notice: The four DJs on this page are AI generated.