1 / 1
Magnetic Parts Trays for 10x2mm magnets — zdjęcie 1

Magnetic Parts Trays for 10x2mm magnets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Two magnetic parts tray designs with built in segments and a magnet for each segment.

Ocena
0 / 5
Polubienia
6
Pobrania
33
Wydruki
0
Wyświetlenia
294
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

These trays are designed to hold small screws from your latest disassembly or creation.

The linear tray is 5x1 and the square one is 5x5, each segment gets its own 10x2mm cylindrical magnet which can be in any orientation.

The two plates can be held together with a very short M3 bolt or can be glued together. If you fasten one end of it then insert the magnets, starting from the side that is fastened, then after each magnet is in twist the two parts together so the magnet is held in place by the top part, it stops the magnets from jumping out and being a pain.

Tagi