Spiral Vase
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spiral vase model available in two variants.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had this toothbrush holder with its broken cristal vase lying around, so I decided to print it a replacement one.
There are two variants:
- Spiral vase with straight side: this is model meant to fit my toothbrush holder. In addition to the spiral design at the top, it has a straight part at the bottom with the right dimensions for my particular use case.
- Spiral vase: A simpler version of the previous one. It is shorter and without the straight part at the bottom.
These are the overall dimensions of each model:
Print settings
Both printed in transparent PLA and with the “Vase Mode” activated.
This mode in Cura is called “Spiralize Outer Contour” as shown in the screenshot below:
In my case, with an Ender 3 Pro, I had to add a line of custom G-code to the print in order to archive a good surface.
The code is as follows:
M413 S0 ; Disable power loss recovery (for vase mode)
The uploaded G-code files do not have this line added because Printables would not let me upload it. If you use it, and your printer behaves like mine, you will not get a good print.