Spiral Vase
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.43 – €1.75 net (excluding VAT)
For file: CE3PRO_Spiral vase.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.59 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 1.82 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A spiral vase model available in two variants.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 23
- Makes
- 0
- Views
- 104
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I had this toothbrush holder with its broken cristal vase lying around, so I decided to print it a replacement one.
There are two variants:
- Spiral vase with straight side: this is model meant to fit my toothbrush holder. In addition to the spiral design at the top, it has a straight part at the bottom with the right dimensions for my particular use case.
- Spiral vase: A simpler version of the previous one. It is shorter and without the straight part at the bottom.
These are the overall dimensions of each model:
Print settings
Both printed in transparent PLA and with the “Vase Mode” activated.
This mode in Cura is called “Spiralize Outer Contour” as shown in the screenshot below:
In my case, with an Ender 3 Pro, I had to add a line of custom G-code to the print in order to archive a good surface.
The code is as follows:
M413 S0 ; Disable power loss recovery (for vase mode)
The uploaded G-code files do not have this line added because Printables would not let me upload it. If you use it, and your printer behaves like mine, you will not get a good print.