1 / 8
Light for Romboss magnetic building blocks
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inset tile for Romboss magnetic building blocks (65mm). Its a smaller Connetix clone.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inset tile with light for chinese clone of Connetix - Romboss. Block size is 65mm. (Aliexpress LINK)
You will also need:
- 1pc 8mm LED (Aliexpress LINK)
- 3V (CR2032) battery holder with switch (Aliexpress LINK)
- 4pcs M3x12 screws
- Soldering iron
- Hot glue
Instructions
- Print tile back and front in your desired color. If you don't have 8mm LED, I have provided also standard 5mm led front tile.
- Print the diffuser with transparent filament.
- Using soldering iron attach the LED to the wires of the battery holder.
- Take the battery holder and use the hot glue to attach it to the back side of the tile (as in the pictures).
- Put the LED through the hole on the front tile.
- Attach diffuser and using hot glue fasten it in place
- Using the 4 screws, screw the box together.
- Now you can snap-attach the light to the hollow Romboss tile