1 / 8
Light for Romboss magnetic building blocks
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inset tile for Romboss magnetic building blocks (65mm). Its a smaller Connetix clone.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 119
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Inset tile with light for chinese clone of Connetix - Romboss. Block size is 65mm. (Aliexpress LINK)
You will also need:
- 1pc 8mm LED (Aliexpress LINK)
- 3V (CR2032) battery holder with switch (Aliexpress LINK)
- 4pcs M3x12 screws
- Soldering iron
- Hot glue
Instructions
- Print tile back and front in your desired color. If you don't have 8mm LED, I have provided also standard 5mm led front tile.
- Print the diffuser with transparent filament.
- Using soldering iron attach the LED to the wires of the battery holder.
- Take the battery holder and use the hot glue to attach it to the back side of the tile (as in the pictures).
- Put the LED through the hole on the front tile.
- Attach diffuser and using hot glue fasten it in place
- Using the 4 screws, screw the box together.
- Now you can snap-attach the light to the hollow Romboss tile