Plug housing for 4 pin pogo plugs with ears
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a magsafe way to connect a USB lead and found these pogo pin boards on AliExpress. This is a plug design.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 230
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I needed a way to connect my V0 tophat webcam in a way that I can make a quick disconnect when it needs to be lifted (for maintenance or printing PLA/TPU). I bought these Pogo pins:
You need the version with the ears. In the housing there is enough space to place the wires with some heatshrink tubes. You need to thread the cable (if there is a plug on the end) through the screwnut before soldering the pogo pin plate or you will have to resolder it again ;-).
The brace is not really needed but adds additional stability and can be printed in an accent color (like the screw).
Print settings:
Material: PETG/PLA+/ABS
Layer Height: 0.2mm
Walls: 4
Infill: Grid, 15%