1 / 3
Plug housing for 4 pin pogo plugs with ears — image 1
1 / 3

Plug housing for 4 pin pogo plugs with ears

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I needed a magsafe way to connect a USB lead and found these pogo pin boards on AliExpress. This is a plug design.

Rating
0 / 5
Likes
4
Downloads
41
Makes
0
Views
230
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

I needed a way to connect my V0 tophat webcam in a way that I can make a quick disconnect when it needs to be lifted (for maintenance or printing PLA/TPU). I bought these Pogo pins:

https://www.aliexpress.com/item/1005006525401310.html?spm=a2g0o.order_list.order_list_main.123.764f1802ri40dH

You need the version with the ears. In the housing there is enough space to place the wires with some heatshrink tubes. You need to thread the cable (if there is a plug on the end) through the screwnut before soldering the pogo pin plate or you will have to resolder it again ;-). 

The brace is not really needed but adds additional stability and can be printed in an accent color (like the screw).

Print settings:

Material: PETG/PLA+/ABS
Layer Height: 0.2mm
Walls: 4
Infill: Grid, 15%

Tags