1 / 7
air duct for CHC hotend installed on K1C creality
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Since the hotend is shorter than stock, it is necessary to increase the height of the table by 11 mm.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 682
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (0)Kolekcje (11)Powiązane
Since the hotend is shorter than stock, it is necessary to increase the height of the table by 11 mm. I did this by increasing this spacer to 11 mm, from the link https://www.printables.com/model/681528-bed-shims-fits-creality-k1-and-k1-max/remixes
I also used 6 x 16mm M3 screws.
You can also install a mount for a silicone nozzle cleaner at this link https://www.printables.com/model/1204322-creality-k1c-chc-short-silicone-nozzle-cleaner-mod
