1 / 7
air duct for CHC hotend installed on K1C creality
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Since the hotend is shorter than stock, it is necessary to increase the height of the table by 11 mm.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 49
- Makes
- 0
- Views
- 682
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Since the hotend is shorter than stock, it is necessary to increase the height of the table by 11 mm. I did this by increasing this spacer to 11 mm, from the link https://www.printables.com/model/681528-bed-shims-fits-creality-k1-and-k1-max/remixes
I also used 6 x 16mm M3 screws.
You can also install a mount for a silicone nozzle cleaner at this link https://www.printables.com/model/1204322-creality-k1c-chc-short-silicone-nozzle-cleaner-mod
