Ikea Tackan Soap Dispenser Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A screw on lid for the Ikea Tackan jar
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
My girlfriend wanted to repurpose the glass jars that came with the Ikea Tackan (903.223.03) soap dispenser we had after the pump stopped working.
The threads on the jar aren't a standard profile of any kind that I could figure out, so I got as close as I could to the shape and profile using the coil option in Fusion 360. If anyone is curious the coil measurements are 51.75mm diameter, 2 revolutions, 12mm height, 0 degrees of angle, circular cross section, 2.75mm section size, and I used the CUT to make negative threads.
I printed it out of PLA with 5% infill, organic supports on the build plate only, and upside down orientation like the 3D viewer shows.
A 3mf and STEP files are included if someone else wants to make changes or try to adapt it to something else.