desktop clock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This object is sliced with Bambu Studio and printed with Bambu Lab X1C
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The model in the photos was prepared with Bambu Studio and printed with Bambu Lab X1C. I also included B. S. screenshots among the photos. Because I set the main body to 0.2 layer thickness and the star in the core to 0.12 layer thickness.
The filament colors I use were chosen entirely according to my own taste and the materials I had on hand. I know there are 3D hobbyists who have more fun than me.
As a machine, I used a cheap product that works with standard AA batteries that are available in the market ( 55 x 55 x 20 mm ). A shaft length of around 13 - 15 mm is suitable. I used the hour and minute hands by cutting the ones that came with the machine to length.
That's all...
Good luck...