desktop clock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This object is sliced with Bambu Studio and printed with Bambu Lab X1C
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 18
- Makes
- 0
- Views
- 80
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The model in the photos was prepared with Bambu Studio and printed with Bambu Lab X1C. I also included B. S. screenshots among the photos. Because I set the main body to 0.2 layer thickness and the star in the core to 0.12 layer thickness.
The filament colors I use were chosen entirely according to my own taste and the materials I had on hand. I know there are 3D hobbyists who have more fun than me.
As a machine, I used a cheap product that works with standard AA batteries that are available in the market ( 55 x 55 x 20 mm ). A shaft length of around 13 - 15 mm is suitable. I used the hour and minute hands by cutting the ones that came with the machine to length.
That's all...
Good luck...