1 / 4
TP-Link WR802N Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Case/Sleeve for a TPlink WR802N. Recommended printing setting (tested on Bambu P1S): 15% infill Support enabled 0.2mm
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
A Case/Sleeve for a TPlink WR802N.
Recommended printing setting (tested on Bambu P1S):
15% infill
Support enabled
0.2mm
Print with LED-face side down
Support is required for the overhangs on the interface side and “locking lips”
Tested on Bambu P1S print time ~34min
For Commercial use contact me.
