Galvanized Trash Can Remix, Revised with Sturdier Handle, Added Bag Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed Handy Handcrafts model, sturdier and larger. New lid with a sturdier handle. New bag holder liner
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a workable trash can that fits a t-shirt grocery store bag. When I increased it's size from Handy Handcrafts original, https://www.printables.com/model/713165-galvanized-trash-can the it failed at the sharp corners along the top and bottom after some use. This remix makes the trash can thicker and it seems to be holding up well. I used lightning fill on the can bottom and gyroid in the walls.
I also remixed the lid so that it is flat on the bottom with groove to fit the can. Handy Handcrafts original lid worked fine with the supports, but this doesn't use much more filament if you use lightning fill versus even organic supports. The handle prints fine without supports. If you want to use the original lid, scale it up 250
Update: My handle broke off after a couple of weeks so I've added a lid with a sturdier handle. I is attached with a gusset to the lid and I used gyroid infill at the connections.
New: Added a Liner that can hold a grocery Tshirt bag. Bag handles fit into slots at the liner base to hold the bag in place. TShirt bag works without the liner in the can, but looks neater with the liner installed. (See Photos)
I have a similar rectangular trash can with a liner to hold that bag, see https://www.printables.com/model/1760593-grocery-tshirt-bag-trash-can-added-a-round-bag-hol