1 / 2
PC Fan Stand/Feet 25mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Feet for PC Fan with 25mm thickness. Angle 15 degrees. PLA, 16min, 4 grams.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 86
- Wydruki
- 2
- Wyświetlenia
- 346
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 4)Remiksy (0)Kolekcje (18)Powiązane
Feet for PC Fan with 25mm thickness. Angle 15 degrees. On foto is 120x25mm fan. You need two feet for one PC fan. Feet click onto fan, no screws or bolds needed. Printable on it's side without supports.