PUG mount for 20x20 extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A print in place PUG mount for 20x20 extrusions using one screw and a t-nut
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 157
- Wydruki
- 0
- Wyświetlenia
- 580
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
What is it?
This is a print in place PUG mount for 20x20 extrusions using one screw and a t-nut. To insert the PUG you have to bend the two halves apart. Inserting the screw will fix the two halves together afterwards.
BOM:
M3x16 screw and a T-nut or slide-in-nut.
How it works:
To insert the PUG you have to bend the two halves apart. Inserting the screw will fix the two halves together afterwards. This screw is also used to fix the mount onto the extrusion with the nut.
Printing:
ABS/ASA, no support, 4 perimeters, 5 top/bottom layers, 40% infill. Make sure your tolerances are tuned in, or else the two halves could stick together!
Added step file to make remixing easy