1 / 2
Bosch laser level plumb mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's to hang the laser from a cord from the ceiling. Useful for putting floors in. Couldn't find one here. if your…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 1553
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (15)Powiązane
It's to hang the laser from a cord from the ceiling.
Useful for putting floors in.
Couldn't find one here.
if your laser is
< 110mm high
< 110mm long
< 80mm width
it will fit too.
Maybe the screwhole won't line up, but it's a functional print, so just make a new one with a drill.
Print Settings
Rafts:
No
Supports:
No
200
Infill:
20
Filament:
PolyMaker PLA
Category: 3D Printing