Sparmax Compressor Regulator Skadis Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An Ikea Skadis mount for a Sparmax Compressor Regulator
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 110
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This mount is used to relocate the air regulator valve on Sparmax compressors to a Skadis pegboard.
Compatible with the following Sparmax models:
- TC-501N
- AC-500
- TC-610/620 series
It should be compatible with the AC-501X (which doesn't have a moisture trap) but I haven't confirmed it myself.
Most compressors should terminate with a ¼" BSP male thread once the regulator is taken off The regulator can then be re-connected with a standard ¼" BSP female-to-female air hose and a ¼" BSP male-to-male adapter (or a female-to-male hose).
The regulator usually terminates with a female ¼" BSP female wingnut thread:
It can be left in place if the air feed hose connects from the front or side, but if you want the air feed located in the back (Like I did) you'll have to dismantle it and connect the male-to-male adapter or hose directly into the regulator.
The hook/interface model is from CSD_Salzburg's hook system.