Sparmax Compressor Regulator Skadis Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An Ikea Skadis mount for a Sparmax Compressor Regulator
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 16
- Makes
- 0
- Views
- 110
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This mount is used to relocate the air regulator valve on Sparmax compressors to a Skadis pegboard.
Compatible with the following Sparmax models:
- TC-501N
- AC-500
- TC-610/620 series
It should be compatible with the AC-501X (which doesn't have a moisture trap) but I haven't confirmed it myself.
Most compressors should terminate with a ¼" BSP male thread once the regulator is taken off The regulator can then be re-connected with a standard ¼" BSP female-to-female air hose and a ¼" BSP male-to-male adapter (or a female-to-male hose).
The regulator usually terminates with a female ¼" BSP female wingnut thread:
It can be left in place if the air feed hose connects from the front or side, but if you want the air feed located in the back (Like I did) you'll have to dismantle it and connect the male-to-male adapter or hose directly into the regulator.
The hook/interface model is from CSD_Salzburg's hook system.