The Mechpincher - Model Storage Solution
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No magnets, no foam, no problem. Store your hex models (30 or 32mm) in the tight, loving embrace of PETG.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 676
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a way to store my models for transit that didn't rely on magnets or take up space like foam did - and also just looked and felt cool enough to be remodeled into a mech hanger or storage bay as a display. This is the weekend worth of solution I came up with.
Tolerances are still a little tight so I'm happy to take on any notes.
If you want one yourself, you'll need two springs per Pincher.
1 x 5mm OD,0.5mm Wire Size,5.5mm Compressed Length,10mm Free Length
1 x 5mm OD,0.5mm Wire Size,11mm Compressed Length,20mm Free Length
It's still a little finicky getting the doors on, and they'll want for a drop of superglue to hold them in place.
Best printed in PETG at 25% infil or more as the button and pincher parts have fairly thin parts. I printed the button + pincher with a minimum of 3 perimeters.