Multiboard compatible dishwasher tablet dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a dishwasher tablet dispenser which is compatible with Multiboard. both with and without Text
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 331
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a dishwasher tablet dispenser which is compatible with Multiboard. It incorporates a Multipoint rail slot into the design meaning it should be compatible with both Rail pop-ins and lite Multipoints.
This design prints on two plates due to different print settings - the second plate which holds the front section is to be printed with 0 top and bottom layers which creates the honeycomb effect by exposing the infill on both sides - Altering the print settings of this second plate could cause trick to not work so please alter at your own risk.
The main body without text is also included on a third plate
I made use of O Bolt-lock inserts & snaps which i've included on a plate for convienence - All other compatible mounting options and associated Multiboard items are available on the parts library :-https://www.multiboard.io/parts-library
Compatibility with multiboard used in good faith following the multiboard license available here - https://www.multiboard.io/license.
This item is Designed completely in Freecad by myself, using the lite multipoint rail negative .STEP provided by the original creator Keep Making of multiboard.io which is available here - https://than.gs/m/1145206 to allow compatibility.