Tomorrowland Peoplemover Sign

I modeled this after the pre-2021 Tomorrowland Transit Authority Peoplemover sign when it was sponsored by Alamo.

I modified the sign proportions to accommodate printer limitations, but maintain the spirit of the original design.

The sign prints in two parts; the main sign, and the optional Alamo sponsorship add-on. I think the splash of yellow in the Alamo add-on makes the sign pop.  The two parts press together. If the slots are loose, a few drops of superglue gel will hold them. 

I used an Ender 3 Max Neo to print. After some experimenting, I found better results printing the Alamo logo using a layer height modifier and printing the logo with 1 perimeter. I'm sure results will vary with other printers and the modifier may not be necessary. Try it with 2 perimeters first to see if the logo prints nicely. 

The sign can be printed with a single filament printer and a few filament changes. Prusa slicer makes color changes easy. Be sure to double check the preview to assure your color changes are at the correct layers. 

Print Settings (general)

• Nozzle: 0.4 mm
• Layer Height: 0.20 mm
• Brim: As needed; I used 3mm to help with adhesion.
• Infill: 20%

Print Settings (Main Sign)

• Vertical Shells - Perimeters (walls): 2

Print Settings (Alamo Add-on)

• Vertical Shells - Perimeters (walls): 2
• Use Height Range Modifier in Prusa Slicer for Alamo logo
  • Range 9.80-10.30 mm
  • Vertical Shells - Perimeters (walls): 1
  • Using 1 perimeter on the logo gave me better top layer results for the lettering. Feel free to try it with or without the Modifier.

Colors

• Polymaker Matte PolyTerra PLA, Army Blue - https://amzn.to/41vxpZx 
• Polymaker PolyTerra PLA+, Blue - https://amzn.to/4i8S8aX
• Geeetech Silk PLA, Metallic Silver - https://amzn.to/41urq75 
• ELEGOO PLA+, White - https://amzn.to/3XfMP1u 
• ELEGOO PLA+, Yellow - https://amzn.to/4hRqiQC 

Filament Color Change Layers (.20 mm layer height)

Main Sign

• Begin: Army Blue
• Layer 42: Blue
• Layer 47: Army Blue
• Layer 52: Blue
• Layer 55: Silver
• Layer 59: White

Alamo Add-on

• Begin: Army Blue
• Layer 36: Blue
• Layer 46: Army Blue
• Layer 49: Yellow

Enjoy the model! I'd love to see your prints.

Do not sell prints, STLs, or otherwise make money from this model. If I catch you profiting from this design, I shall summon the Tiki Gods to rain upon your filament.