Tomorrowland Peoplemover Sign
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tomorrowland Transit Authority Peoplemover sign with Alamo sponsorship (Pre-2021)
- Rating
- 5 / 5
- Likes
- 48
- Downloads
- 122
- Makes
- 1
- Views
- 600
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Architecture & Urbanism
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I modeled this after the pre-2021 Tomorrowland Transit Authority Peoplemover sign when it was sponsored by Alamo.
I modified the sign proportions to accommodate printer limitations, but maintain the spirit of the original design.
The sign prints in two parts; the main sign, and the optional Alamo sponsorship add-on. I think the splash of yellow in the Alamo add-on makes the sign pop. The two parts press together. If the slots are loose, a few drops of superglue gel will hold them.
I used an Ender 3 Max Neo to print. After some experimenting, I found better results printing the Alamo logo using a layer height modifier and printing the logo with 1 perimeter. I'm sure results will vary with other printers and the modifier may not be necessary. Try it with 2 perimeters first to see if the logo prints nicely.
The sign can be printed with a single filament printer and a few filament changes. Prusa slicer makes color changes easy. Be sure to double check the preview to assure your color changes are at the correct layers.
Print Settings (general)
- Nozzle: 0.4 mm
- Layer Height: 0.20 mm
- Brim: As needed; I used 3mm to help with adhesion.
- Infill: 20%
Print Settings (Main Sign)
- Vertical Shells - Perimeters (walls): 2
Print Settings (Alamo Add-on)
- Vertical Shells - Perimeters (walls): 2
- Use Height Range Modifier in Prusa Slicer for Alamo logo
- Range 9.80-10.30 mm
- Vertical Shells - Perimeters (walls): 1
- Using 1 perimeter on the logo gave me better top layer results for the lettering. Feel free to try it with or without the Modifier.
Colors
- Polymaker Matte PolyTerra PLA, Army Blue - https://amzn.to/41vxpZx
- Polymaker PolyTerra PLA+, Blue - https://amzn.to/4i8S8aX
- Geeetech Silk PLA, Metallic Silver - https://amzn.to/41urq75
- ELEGOO PLA+, White - https://amzn.to/3XfMP1u
- ELEGOO PLA+, Yellow - https://amzn.to/4hRqiQC
Filament Color Change Layers (.20 mm layer height)
Main Sign
- Begin: Army Blue
- Layer 42: Blue
- Layer 47: Army Blue
- Layer 52: Blue
- Layer 55: Silver
- Layer 59: White
Alamo Add-on
- Begin: Army Blue
- Layer 36: Blue
- Layer 46: Army Blue
- Layer 49: Yellow
Enjoy the model! I'd love to see your prints.
Do not sell prints, STLs, or otherwise make money from this model. If I catch you profiting from this design, I shall summon the Tiki Gods to rain upon your filament.