1 / 6
Husky Build-Out 2-Drawer Bottom Drawer Dividers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapters to create dividers for the bottom drawer of the Husky Build-Out 2-Drawer tool box using 1/2" or 1/4" plywood
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 825
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (42)Powiązane
Adapters for creating dividers in the bottom drawer of the Husky Build-Out 2-Drawer Tool Box using 1/2" or 1/4" plywood. These allow you to divide the bottom drawer into vertically or horizontally.
There are two types of dividers for plywood width.
- Shorter divider adapters that sit on the top of the ridges that run along the lines that divide the drawer into thirds.
- Longer divider adapters designed for sections where there are no ridges underneath.
Approximate lengths for plywood dividers:
| Plywood Thickness | Horizontal Divider | Vertical Divider on Ridge | Center Vertical Divider |
| 1/2" | 14 1/2" | 9 15/16" | 10 1/4" |
| 1/4" | 15 3/8" | 10 13/16" | 11 1/8" |
Printed using a 0.40mm nozzle in matte PLA with a layer height of 0.28mm.
