1 / 3
Adapter for winding the filament onto the D200 coil with a screwdriver. — zdjęcie 1
1 / 3

Adapter for winding the filament onto the D200 coil with a screwdriver.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter for winding the filament onto the D200 coil with a screwdriver.

Ocena
0 / 5
Polubienia
11
Pobrania
126
Wydruki
0
Wyświetlenia
575
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

A device for fast-rewinding the filament with a screwdriver. Made for standard D200 coils with a depth of 65mm and an inner diameter of 53mm. The cartridge on the shank is 13mm, the outer diameter of the cartridge is 43mm. The difference from analogues: it is designed in such a way that the center of gravity is shifted closer to the hand. For clamping in the cartridge there are two oval legs on the body, they cope with the task. . The photo shows the previous version of the adapter. I have made changes at the moment. There is a screw included for deeper coils (if the ears are broken off). There is an M6 thread at the bottom of the spindle for experimentation.
.

Instruction manual
Print 3 walls with 15% PETG filling. Support is needed! The supports are ordinary! My treelike ones are flying off!! For central support, I need a wide skirt, my A5M knocks it down.