1 / 3
Adapter for winding the filament onto the D200 coil with a screwdriver. — image 1
1 / 3

Adapter for winding the filament onto the D200 coil with a screwdriver.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adapter for winding the filament onto the D200 coil with a screwdriver.

Rating
0 / 5
Likes
11
Downloads
126
Makes
0
Views
575
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

A device for fast-rewinding the filament with a screwdriver. Made for standard D200 coils with a depth of 65mm and an inner diameter of 53mm. The cartridge on the shank is 13mm, the outer diameter of the cartridge is 43mm. The difference from analogues: it is designed in such a way that the center of gravity is shifted closer to the hand. For clamping in the cartridge there are two oval legs on the body, they cope with the task. . The photo shows the previous version of the adapter. I have made changes at the moment. There is a screw included for deeper coils (if the ears are broken off). There is an M6 thread at the bottom of the spindle for experimentation.
.

Instruction manual
Print 3 walls with 15% PETG filling. Support is needed! The supports are ordinary! My treelike ones are flying off!! For central support, I need a wide skirt, my A5M knocks it down.