Antenna Winder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Antenna Winder with strain relief for endfed lightweight antennas
- Ocena
- 5 / 5
- Polubienia
- 91
- Pobrania
- 573
- Wydruki
- 7
- Wyświetlenia
- 2703
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
I created this antenna winder for SOTA activations, but of course you can use if for non-sota activities as well.
The winder serves a second purpose as a strain relief for an endfed antenna and the paracord used for fixing the antenna to a tree or tent peg. The winder is then part of your deployed antenna which means one thing less you can lose on a mountain.
I've also packed a rope tensioner into the creation so that you can adjust the length / tension of the paracords easily as well. See the pictures if you don't know how to thread it.
As an antenna I use an 21m endfed made from cheap electronics wire (0.15mm²) which ends up at a total weight of roughly 130g.