Pixel 8 Pro Backglass Magsafe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement file for the back glass on the pixel 8 pro with magsafe compatibility
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 273
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
This is a replacement for the back glass of the pixel 8 pro. My personal model was printed at .12 layer height in PETG. The couple of test prints I did were done with a layer height of .2 and still fit just as well.
While I've had my own pixel 8 pro I've gone through 2 back glass replacements even with a case on. The first shattered in a case after dropping less than a foot to the floor, the other broke when the lip of the case grabbed the edge of the glass when removing the case. Instead of replacing the glass with another piece of glass that would break, I modeled it and printed it in PETG.
This model has compatibility with this magsafe ring: https://a.co/d/gwzt8Xe
This back is thicker than stock to accommodate the magsafe ring. Case compatibility will be limited.