1 / 2
Shellington Labs Kirin Plungerhead
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
This is a replacment plungerhead for the Shellington Labs Kirin Type A. A friend has the blaster and their plungerhead cracked. This model was quickly thrown together and printed with PETG as a replacement part. The printed part has been tested and works fine :)
Model was printed with PETG at 0.15mm layer height with supports. The supports were removed with a 2.5mm drill bit to clear out the hole for the grub screw and the main shaft. To ensure the part was strong enough, I printed mine with 100% infill.