1 / 2
Shellington Labs Kirin Plungerhead
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement plungerhead for the Shellington Labs Kirin Type A
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 36
- Makes
- 0
- Views
- 172
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
This is a replacment plungerhead for the Shellington Labs Kirin Type A. A friend has the blaster and their plungerhead cracked. This model was quickly thrown together and printed with PETG as a replacement part. The printed part has been tested and works fine :)
Model was printed with PETG at 0.15mm layer height with supports. The supports were removed with a 2.5mm drill bit to clear out the hole for the grub screw and the main shaft. To ensure the part was strong enough, I printed mine with 100% infill.