Tandy 1000 EX Expansion Bay Top Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reproduction Tandy 1000 EX top cover, created using an original EX cover for reference.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Also available on MakerWorld with profiles for Bambu printers.
I created this using a real Tandy 1000 EX cover for reference. I endeavoured to make it an accurate reproduction.
The smooth curve at the back of the cover does make it challenging to print. I have provided three variants of the model:
- One which limits the overhang to 45 degrees. I used this quite a bit with my fit testing print and was reliable and clean to print. The fact that it is not as round as the original does bug me though.
- A second with only a 20 degree overhang. This must be printed with lowest possible layer height and likely still won't be as clean as the version with 45 degree overhang. I do personally still prefer the more rounded edge from this model.
- A third with accurate, fully rounded curve. This can't really be printed cleanly on non-commercial printers.
I have included variations of raw model files as well as the Fusion CAD file if you would like to experiment more yourself.
Note: I print a the a second "vase” model on the plate at the same time as a solution to getting a print profile with clean prints. Otherwise there will be some quality issues related to insufficient cooling towards the end of the print.
The HX version is available here.