1 / 3
Monolith XCarriage MGN12H 9mm for Dragonburner Yavoth
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Monolith XCarriage MGN12H 9mm for Dragonburner Yavoth
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 136
- Wydruki
- 1
- Wyświetlenia
- 1073
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 1) (Komentarze: 6)Remiksy (1)Kolekcje (27)Powiązane
It combines Xol monolith carriage with dragonburner mount.
For MGN12H block and 9mm belts.
Added more screws to secure belt clips.
WARNING: The middle screw should be the same level as the top and bottom screws; if not, the worst situation is that it may snap belts.
Hardware requirement:
Square nuts M3*5.5*2.5 x8 (DIN562 is thiner so I guess it should also work)
BHCS M3*20 x6
SHCS M3*10 x5