1 / 3
Flush Printed Washers for 1/2", 3/8", and 1/4" drives both SAE and Metric
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I did a set of flush printed 2 color washers for this twist socket organizer.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 620
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (17)Powiązane
1-4 Washers.3mf contains full set of metric and SAE washers for smaller shaft twist nuts for ¼" drive sockets.
3-8 Washers.3mf contains full set of metric and SAE washers for larger shaft twist nuts for 3/8" and ½" sockets plus there are some of the rails that I used for my set up
Separate STL files are extra washers that I needed to complete my setup
How to add text to object in Bambu Studio:
Steps:
- Select object
- Click text tool
- Drop down allows you to select font, size (5 to 8 point works well for small size), set depth in 2 boxes to .4 or (2X the line height), type text into last selection box, move mouse to object surface where you want to add text and click to add
- To make text flat with surface of object go to “objects” menu on left side of Bambu Studio
- Select the text item you just created
- Change filament color if desired
- Below you will see menu to select line width which shows .45 as standard, change to .3mm
- Right click on text item and select change item, select “modifier” and select ok
- Select all items on the plate and rotate them on X axis 180° so they are face down on the plate
• ⁃ Slice and print plate