1 / 3
Flush Printed Washers for 1/2", 3/8", and 1/4" drives both SAE and Metric
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I did a set of flush printed 2 color washers for this twist socket organizer.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 82
- Makes
- 0
- Views
- 620
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
1-4 Washers.3mf contains full set of metric and SAE washers for smaller shaft twist nuts for ¼" drive sockets.
3-8 Washers.3mf contains full set of metric and SAE washers for larger shaft twist nuts for 3/8" and ½" sockets plus there are some of the rails that I used for my set up
Separate STL files are extra washers that I needed to complete my setup
How to add text to object in Bambu Studio:
Steps:
- Select object
- Click text tool
- Drop down allows you to select font, size (5 to 8 point works well for small size), set depth in 2 boxes to .4 or (2X the line height), type text into last selection box, move mouse to object surface where you want to add text and click to add
- To make text flat with surface of object go to “objects” menu on left side of Bambu Studio
- Select the text item you just created
- Change filament color if desired
- Below you will see menu to select line width which shows .45 as standard, change to .3mm
- Right click on text item and select change item, select “modifier” and select ok
- Select all items on the plate and rotate them on X axis 180° so they are face down on the plate
• ⁃ Slice and print plate