1 / 4
Stealthburner for a Nitehawk-SB and an LGX Lite V2 / Pro — zdjęcie 1
1 / 4

Stealthburner for a Nitehawk-SB and an LGX Lite V2 / Pro

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is for the Bondtech LGX Lite PRO eXtruder (LGX Lite V2)

Ocena
5 / 5
Polubienia
4
Pobrania
69
Wydruki
1
Wyświetlenia
864
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is for the Bondtech LGX Lite PRO eXtruder and should work with Bondtech LGX Lite V2. I combined the Stealthburner for a Nitehawk-SB and an LGX by Ron and the BondtechAB Voron model to create the correct fit. I spliced it together in Tinkercad so it's not a pretty as it could be. 

This model can use Stubby PG7 Cable Gland Mount for an umbilical cord mount. (https://www.printables.com/model/391516-stubby-pg7-cable-gland-mount/files)

I also added a X-Stop micro switch can be attached to the Nitehawk PCB. I made a simple modification of the gantry with a M5 spacer to lift the belt bolt for the switch activation.  This can't be used for the Stealthchanger system.

The Micro Switch will need to be supported when printing. I used enforced supports for that overhang only.