1 / 4
Stealthburner for a Nitehawk-SB and an LGX Lite V2 / Pro — image 1
1 / 4

Stealthburner for a Nitehawk-SB and an LGX Lite V2 / Pro

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is for the Bondtech LGX Lite PRO eXtruder (LGX Lite V2)

Rating
5 / 5
Likes
4
Downloads
69
Makes
1
Views
860
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution

This is for the Bondtech LGX Lite PRO eXtruder and should work with Bondtech LGX Lite V2. I combined the Stealthburner for a Nitehawk-SB and an LGX by Ron and the BondtechAB Voron model to create the correct fit. I spliced it together in Tinkercad so it's not a pretty as it could be. 

This model can use Stubby PG7 Cable Gland Mount for an umbilical cord mount. (https://www.printables.com/model/391516-stubby-pg7-cable-gland-mount/files)

I also added a X-Stop micro switch can be attached to the Nitehawk PCB. I made a simple modification of the gantry with a M5 spacer to lift the belt bolt for the switch activation.  This can't be used for the Stealthchanger system.

The Micro Switch will need to be supported when printing. I used enforced supports for that overhang only.