Saturn V SIC Hold down structure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the hold down structure in the SIC stage that the hold down arms clamped onto prior to launch.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
The Saturn V model that accompanies Farscape1's LUT is missing this detail. With it missing the hold down arm clamps are retracted. Not essential but a detail I thought should be added. They fit to the bottom of the heat shield and along the vertical line of the white/black paint scheme on the booster. The dimensional data came from a drawing that David Weeks did on the Saturn V.
Both the arms in Farscape1's and bglasford1's models of the LUT will fit though Farscape1's is tight. The pic show a structure installed, the other shows the white one printed in PLA and the grey one in resin. This is 1/72 scale to fit my Saturn V, to fit the original model use 1.2 in the scale tool.
They were printed on a Creality K1 and a Creality Halot Mage